Description
APPLICATION: - For 2002-2005 Dodge Ram 1500 Models - For 2003-2005 Dodge Ram 2500 / 3500 Models Will Not Fit Dodge Ram Van Models - OEM: 55077120AF, 55077121AF FEATURE: - Completely sealed: Prevents moisture from being trapped inside the housing. - One-way vent: Drives out moisture and avoids lens misting. - Multi-surface reflectors: Increase light output & distance. - PC lens: Impact resistance for an enhanced driving experience in any environment. SPECIFICATION: - Black Housing Clear Lens Amber Reflector - Bulbs are Not included, need to reuse original bulbs - Low Beam Bulb Type:9007(Not Includes) - High Beam Bulb Type:9007(Not Includes) PACKAGE INCLUDES: - 1 Pair of Black Headlights NOTE: Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The center lines of the headlights should not be any higher than 3.5 feet above the ground. 1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle. 2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens. 3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall. 4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line. 5. Test your results. Condensation DOES NOT Indicate Crack It's normal when there is condensation accumulated inside headlights. Condensation occurs because a lot of reasons, such as temperature differences, low-pressure areas drawing moisture in winter, etc. It won't affect the optical functions of headlights How to Drive Away Temporary Condensation 1. Check that vents aren't blocked and switch on the low beams for about 20 mins 2. Take the headlight bulb out and clear moisture 3. Put a silica gel packet in the housing to soak up the moisture WE ACCEPT THESE PAYMENT METHODS ( 10% sales tax will be applied for orders shipped to Washington state by state law ) 30 Days easy returns satisfaction guarantee. Items to be returned must be in original factory condition. Please enclose a note about item number and order id, your eBay ID and the reason of return. On Sep 1, 2023 at 00:56:23 PDT, seller added the following information: On Sep 20, 2023 at 04:23:13 PDT, seller added the following information: On Jan 18, 2024 at 03:33:08 PST, seller added the following information: On Mar 12, 2024 at 04:46:52 PDT, seller added the following information: On Apr 12, 2024 at 04:32:12 PDT, seller added the following information: On May 21, 2024 at 02:17:13 PDT, seller added the following information: